Trail: Tuliptree Trail
Hike Location: Beall
Woods State Park
Geographic Location: southwest of Mount
Carmel , IL (38.35424, -87.82814)
Length: 1 mile
Difficulty: 1/10 (Easy)
Date Hiked: June 2016
Overview: A short nature trail loop past some large poplar
trees.
Park Information: https://dnr.illinois.gov/parks/park.beallwoods.html
Directions to the trailhead: In extreme eastern Illinois ,
take I-64 to SR 1 (exit 130). Exit and
go north on SR 1. Drive SR 1 north 11.9
miles to CR 900N; there is a sign for Beall
Woods State Park
at this intersection. Turn right on CR
900N. Drive CR 900N east 1.8 miles to
the state park entrance on the left.
Turn left to enter the park, and drive the main park road to the Visitor
Center at the road’s end. Park in the paved parking lot in front of the
Visitor Center .
The hike: Located in southeastern Illinois
flush against the Wabash River ,
Beall Woods
State Park (pronounced like “bell”)
protects 329 acres of old-growth forest.
The park’s name comes from the Beall family, who owned this land from
the mid 1800’s until 1965. The Beall
family farmed part of the land but left some of the original forest intact.
When Laura Beall, the last heir
from the Beall family, died intestate, an investor bought the Beall tract at
auction with the intention of harvesting the old-growth timber. Due to local public opposition, the land was
purchased by the State of Illinois
from the investor against his wishes via eminent domain. The park opened in 1966.
The park
has a developed area with a small fishing lake, a campground, and several
picnic shelters, but the park’s five hiking trails explore the old-growth
forest. I came here intending to do a medium-length hike of several miles, but
I found all of the trails along the creeks and Wabash
River closed due to recent
flooding. Hiking on closed trails is
never wise (closed trails are usually closed for good reasons), so I hiked the
park’s only open trail: the short Tuliptree Trail described here. While the length was less than I desired, I
had a nice hike, and the brevity was a blessing in disguise due to the mid 90’s temperatures
I faced on that afternoon.
Trailhead: Tuliptree Trail |
Start by
picking up a park brochure and trail map at the Visitor
Center , which was closed on my
visit. (Aside: the park’s website said
that the Visitor Center
would be open when I was there. I have
often found information on the Illinois State Parks’ website to be outdated
and/or wrong.) Next, walk down the
concrete sidewalk-like path that ends at the signed trailhead at the edge of
the woods. The dirt Tuliptree and White
Oak Trails both start here, and they run conjointly at first as they head east
into the woods.
In less
than 500 feet, the Tuliptree and White Oak Trails part ways at a signed
intersection. Angle left to stay on the
Tuliptree Trail loop, which you are hiking counterclockwise. True to its name, the trail passes some large
tulip poplars, but some maple, beech, and cottonwood trees also live here. Numbered orange carsonite posts correspond to
a self-guided trail brochure that may be available at the Visitor
Center provided it is open on your
visit.
Hiking through the old-growth forest |
At 0.3
miles, you cross a narrow ravine on the first of two wood/iron footbridges with
concrete supports. Soon Coffee Creek
comes into view in the distance on the right, and then the trail moves closer
to the creek. Coffee Creek is a small
creek that drains a narrow watershed consisting mostly of farmland. The sandy-bottomed creek was very shallow on
my visit, but water levels can get high after a thunderstorm.
Coffee Creek |
At 0.6
miles, you reach your closest approach to Coffee Creek as you pass a pair of
benches that sit at the top of the steep creek bank. The trail now curves left and climbs slightly
to leave the creek behind you. Soon the
trail joins an old road before coming out at the north end of the parking lot,
thus closing the loop and completing the hike.
No comments:
Post a Comment